If you have any feedback on how we can make our new website better please do contact us. We would like to hear from you.
HOPE easy-set threading jig!
PLEASE SEE BELOW A FEW TIPS ON GETTING THE MOST OF YOUR THREADING JIG!
ABOUT THE HOPE THREADING JIG:
Its called the easy-set threading jig because the depth cut is done by twisting the outer (silver round handle) clockwise to push the main body into the cut.The handlehas an internal click system so 9 twist clicks gives you the depth for the 12 tpi , 7 twist clicks gives you the depth for the 14 tpi, 5 twist clicks gives you the depth for the 16 tpi and 3 twist clicks give to the depth for the 20 tpi.The handle on the back gives a 6" swing soyou can rotate under control easily.
The 20, 16 ,14 and 12 tpi parts are machined with the front thread out of one piece. This gives ultimate accuracy unlike added thread adapters.
THREADS NOW AVAILABLE ARE:
3/4 X 16 TPI 16 and 12 tpi
1" x 8" TPI 16 and 12 tpi
M30 x 3.5 16 and 12 tpi
M33 x 3.5 full range
1 1/14 x 8 full range
1 1/2 x 6 tpi, 16 and 12 tpi.BASIC PACKAGE:
JIG WITH ONE TPI THREAD (16 tpi as standard), TOOL POST STEM AND CUTTER + 8 PAGE INSTRUCTION MANUAL.£219.00 (prices current from 20.6.17)
Please use the table below to order the jig that best suits your lathe. If you make a mistake in ordering, please just drop me an email or call! M33 x 3.5
M33 x 3.5 with UK postage
M33x 3.5 with worldwide postage
1" 1/4"x 8 TPI
1 1/4 x 8 with UK postage
1 1/4 x 8 with worldwide postage
1" x 8 TPI
1 x 8 with UK postage
1 x 8 with worldwide postage
1" 1/2" x 6 TPI
1 1/2 x 6 with UK postage
1 1/2 x 6 with worldwide postage
3/4" x 16 TPI
3/4 x 16 with UK postage
3/4 x 16 with worldwide postage
THE JIG WILL COME WITH A 16 TPI SPINDLE AS STANDARD UNLESS SPECIFIED VIA EMAIL UPON ORDERING.
£69.00 (prices current from 20.6.17) Please use drop down box to select which tpi and spindle thread. M33 x 3.51 1/4 x 8 TPI1 x 8 TPI1 1/2 x 6 TPI3/4 x 16 TPI2MT cutter holder + draw bar
Cutter holder is made from stainless steel and comes with 400mm long m8 threaded rod + centralising cone and handle to tighten. 2MT cutter holder with draw bar.
£35.00NEW hinge plate for easy testing of fit.
This plate allows the work piece to swing away from the cutter and test the fit of the thread. If you make the threads to the instructions, you should not need this but to get the perfect thread with the ability to test before taking off the lathe, then this is an excellent upgrade. Video coming soon. Can be fitted to any HOPE threading jig before or after purchase of the jig itself. Easy retro fit!