Products from Hope Woodturning

Hope Woodturning
Close filters
 
from to
 
1 From 11
No results were found for the filter!
Lathe set up with twister 180
Lathe set up with twister 180
A complete set up for starting woodturning. 1.5 Hp fully variable speed twister 180 lathe inc legs. ( please check the lathes tab for current stock) VM100 top-of-the-range chuck with standard jaws and screw pin. Complete pro sander inc...
£2,145.00 * £2,340.00 *
Lathe set up with midi 350
Lathe set up with midi 350
A complete set up for starting woodturning. 1Hp fully variable speed Midi 350 lathe. ( please check lathes tab for current stock) VM100 top-of-the-range chuck with standard jaws and screw pin. Complete pro sander inc abrasive set. Grub...
£1,307.00 * £1,407.00 *
Complete KS grinder inc station and wolverine jig and profiler INC setting tools and manual
Complete KS grinder inc station and wolverine...
Complete KS grinder with a choice of CBN and everything you need for repeatable super sharp grinding. This complete set includes the 8" slow-running KS grinder. CBN wheel with a grit of your choice. Full wolverine grinding jig...
£555.00 *
Threading jig FULL KIT
Threading jig FULL KIT
NEW MK 2 THREADING JIG IS NOW SOLD AS STANDARD. THE NEW JIG HAS A BUILT-IN HINGE PLATE AND IMPROVED PERFORMANCE. PLEASE CHECK THE 65MM MINIMUM MEASUREMENT NEEDED AS PER THE PICTURE IN THE IMAGES. THIS FULL KIT COMES WITH A M33X3.5...
£495.00 *
Grub handle basic starter set
Grub handle basic starter set
Grub handles, basic starter set. Set consists of: 1 x Small grub handle 10mm with 3/8 spindle gouge. 1 x medium grub handle 13mm with a 3/8 (13mm dia) double-ended bowl gouge and (13mm) parting/round skew. Both will fit this handle. 1 x...
£320.00 * £357.00 *
Quick release box starter set
Quick release box starter set
Quick release handle, basic starter set. Set consists of: 1 x Small quick-release handle 10mm with 3/8 spindle gouge. 1 x medium quick-release handle 13mm with a 3/8 (13mm dia) double-ended bowl gouge and (13mm) parting/round skew. Both...
£295.00 * £334.00 *
Sphere jig for flat bed bars.
Sphere jig for flat bed bars.
Paul Howard's sphere jig . Designed by Paul Howard and now available from Hopewoodturning. This jig fits onto lathes with a center height of between 125mm (10" swing) to 280mm (22" swing) For lathes with a center height of 300mm (24"...
£225.00 *
CBN WHEEL
CBN WHEEL
200x 40mm CBN wheel. Manufactured to a high spec, these CBN wheels are as good as they come. Side plating. Bore 30mm. A 5/8" bush is supplied as standard. A blank one is available upon request. Fits the KS grinders with the 5/8 bush...
£140.00 *
6" CBN + M33 lathe holder
6" CBN + M33 lathe holder
6" CBN with M33x3.5 lathe holders Specially made for HOPEWOODTURNING, these lathe sharping wheels are designed for easy touch-up or for demonstrators who need a quick and easy solution to grinding without the use or need to carry a...
£135.00 *
One of each grub screw handle
One of each grub screw handle
HOPE deluxe grub handles. -INC Allen key built in the end for quick removable. Simply pull out and pop back in. - Softex handle grip, very comfortable. - Flat on the bottom so anti-roll. - Brass-tipped grub screws so no marking of the...
£118.00 * £132.00 *
Star drive complete set
Star drive complete set
HOPE Star drive set. Different from other drives, this set is the only case-hardened drive set. The pin is spring-loaded and fully retractable beyond the drive points. The points themselves are longer and sharper than other makes. The...
£110.00 *
Hope Carbide Mini Box Set
Hope Carbide Mini Box Set
NOW COMES WITH A NEW DELUXE GRUB SCREW HANDLE AND IMPROVED HOOK. 6mm hook and straight mini carbide set. Excellent carbide tools for boxes and small hollow forms. Bars are made from stainless steel for strength. The hook is forged to...
£99.00 *
1 From 11