No results were found for the filter!
VM100 chuck M33x3.5 direct thread. VM100 chuck with standard jaws. Direct thread M33 x 3.5 The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. Keyed chucks cannot be...
VM100 chuck with thread inserts VM100 chuck with standard jaws. Inserts for 1 1/4 x 8, 1 1/2 x 6 and 1" x 8 available. The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the...
Base Set Large Easy Core Coring Systems (clamp... Large Easy-Core Coring Systems 14", 16", 18", 20" 22", 24" and 26" EASY-CORE CORING SYSTEMS (14",16",18",20"22", 24" and 26"base sets kept in stock in the UK. Other sizes available to order) Coring doesn't have to be a scary, unnerving...
Easy core Knife set Large Easy-Core Coring Systems 14", 16", 18", 20" 22", 24" and 26" EASY-CORE CORING SYSTEMS (16",18",20",24" basesets kept in stock in the UK. Other sizes available to order) Coring doesn't have to be a scary, unnerving experience...
Oneway spindle steady. Oneway Spindle Steady Take control of your spindles with our easy to mount and operate steady rest, ensuring each spindle is a more enjoyable experience. Reduce vibration of spindles from ½" to 3" in diameter. PACKAGE INCLUDES Tension...
Bowl reversing jaws 14-16" Stronghold chuck Bowl reversing jaws for the Stronghold chuck. (known as mega jaws on the oneway site). Swing dia is 14" closed to 16" fully open.
Vicmarc bowl jaws VM120 Vicmarc 385mm bowl jaw set. For bowls 385mm dia and smaller! Fits only VM120 The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To...
Oneway Bowl steady Oneway Bowl Steady Reduce vibration at the rim of your Bowl or Platter, making finish turning a safer, more pleasurable experience. Our Bowl Steady rest has been well received by novice and professional bowl turners alike. It's very easy...
Vicmarc bowl jaws VM100 Vicmarc 385mm bowl jaw set. For bowls 385mm dia and smaller! The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the...
Laser kit for hollowing jig Laser kit for hollowing jig This laser kit allows the user to see exactly where the cutter is in relation to the inside of the hollow form. You set the off set of the laser say 3mm away from the cutter. When the laser then falls off the...
Bowl reversing jaws 11-13" Talon chuck Bowl reversing jaws for the Talon chuck. (known as Jumbo jaws on the oneway site). Swing dia is 11" closed to 13" fully open.
Hope Carving jig with M33x3.5 chuck thread HOPE carving jig. Fits into the banjo and is fully adjustable. Allows the chuck to screw on and then hold your workpeice at a comfortable angle in front of you to carve and, or paint. A nice feature is that the axis is indexed so when...
Viewed