Lathe Accessoires

HOPE easy arm hollowing jig. Takes all the strain away from turning hollow and open forms. Buy just the easy arm jig for use with your own hollowing tools or as a complete kit with HOPE hollowing tools.

HOPE easy-set threading jig. Its called the easy-set threading jig because the depth cut is done by twisting the outer (silver round handle) clockwise to push the main body into the cut.

HOPE easy arm hollowing jig. Takes all the strain away from turning hollow and open forms. Buy just the easy arm jig for use with your own hollowing tools or as a complete kit with HOPE... read more »
Close window
Hope Woodturning Jigs

HOPE easy arm hollowing jig. Takes all the strain away from turning hollow and open forms. Buy just the easy arm jig for use with your own hollowing tools or as a complete kit with HOPE hollowing tools.

HOPE easy-set threading jig. Its called the easy-set threading jig because the depth cut is done by twisting the outer (silver round handle) clockwise to push the main body into the cut.

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
from to
 
4 From 10
No results were found for the filter!
Hope Carving jig with 1 1/4 x 8 chuck thread
Hope Carving jig with 1 1/4 x 8 chuck thread
HOPE carving jig. Fits into the banjo and is fully adjustable. Allows the chuck to screw on and then hold your workpeice at a comfortable angle in front of you to carve and, or paint. A nice feature is that the axis is indexed so when...
£85.00 *
Hope Carving jig with 1"x8 chuck thread.
Hope Carving jig with 1"x8 chuck thread.
HOPE carving jig. Fits into the banjo and is fully adjustable. Allows the chuck to screw on and then hold your workpeice at a comfortable angle in front of you to carve and, or paint. A nice feature is that the axis is indexed so when...
£85.00 *
Hope Carving jig with 3/4 x 16 tpi chuck thread.
Hope Carving jig with 3/4 x 16 tpi chuck thread.
HOPE carving jig. Fits into the banjo and is fully adjustable. Allows the chuck to screw on and then hold your workpeice at a comfortable angle in front of you to carve and, or paint. A nice feature is that the axis is indexed so when...
£85.00 *
threading spindle/lathe
threading spindle/lathe
These spindles has been specially made in order to be able to replicate the lathe spindle thread. The spindles them selfs are made with a double start thread. So the one above will cut a 3.5 tpi pitch but looks like a finer cutting...
£79.00 *
12" Cole jaw set
12" Cole jaw set
NOVA Large Cole Jaw Set has 120"/304mm bowl diameter capacity. An accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA chuck for specific projects and applications. Please note: Due to sizing, only...
£72.00 *
Vicmarc Vm120 25mm pin jaws
Vicmarc Vm120 25mm pin jaws
Vicmarc Vm120, 25mm pin jaws These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very small...
£69.50 *
Threading Jig spindles
Threading Jig spindles
Optional extra spindles to add to your threading jig.
£69.00 *
Hinge plate for early models of the threading jig.
Hinge plate for early models of the threading jig.
Retro fit for any early HOPE threading jig. It will fit any HOPE threading jig without this already fitted. Comes with fitting instructions.
£69.00 *
VM120 dovetail jaws, 128mm,148mm & 173mm
VM120 dovetail jaws, 128mm,148mm & 173mm
Vicmarc VM120 dovetail jaws. Dovetail Jaws have been designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the Jaws form a perfect circle. VM120 and VM150 chucks...
From £66.50 *
6" no flex faceplate M33 x 3.5
6" no flex faceplate M33 x 3.5
6 Inch Faceplates Our 6" Faceplates and larger, are constructed using cast iron. This enables us to re-enforce the outer diameter with a 1" wide x 1/4" thick rim. This rim is connected to the hub with four ribs tapered to the full length...
£65.00 *
Oneway 2MT Screw chuck
Oneway 2MT Screw chuck
Oneway #2 MT screw chuck This nifty little tool is indispensable when turning small items like drawer knobs or chess pieces. The Oneway Screw Chuck was designed in response to a requirement for making small parts. It is especially well...
£65.00 *
Vm120, shark jaws
Vm120, shark jaws
Vicmarc VM120 chuck, shark jaws. Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. they hold cylinder spigots much more safely than standard jaws. They are much easier and provide a...
From £64.50 *
4 From 10
Viewed