No results were found for the filter!
HOPE carving jig. Fits into the banjo and is fully adjustable. Allows the chuck to screw on and then hold your workpeice at a comfortable angle in front of you to carve and, or paint. A nice feature is that the axis is indexed so when...
£90.00 *
HOPE carving jig. Fits into the banjo and is fully adjustable. Allows the chuck to screw on and then hold your workpeice at a comfortable angle in front of you to carve and, or paint. A nice feature is that the axis is indexed so when...
£90.00 *
HOPE carving jig. Fits into the banjo and is fully adjustable. Allows the chuck to screw on and then hold your workpeice at a comfortable angle in front of you to carve and, or paint. A nice feature is that the axis is indexed so when...
£90.00 *
HOPE stainless steel tool post box set. (30mm post) Made from hard 316 stainless steel which is 48 Rockwell C that will never go rusty! Top rests are made from 22MM round section which allows smooth transition across the rest without...
£90.00 *
Part No. 2176 - Termite Complete Kit The following items plus the Handle & Shank(shown below): #1 Bit (3/8") #2 Bit (½") 3mm Hex Key Grinding Point Grinding Block
£89.00 *
Oneway 2MT live centre BODY ONLY ONEWAY LIVE CENTERS Two good quality bearings mounted in tandem and greased for life will give excellent play-free performance and minimum vibration when turning. ONEWAY Live Centers are designed...
£89.00 *
M33 x 3.5 live centre. 2 MT and twin bearing M33 x 3.5 live centre. Maker: Drechselbedarf Schulte L ength: 155 mm Diameter: 50 mm Ø Morse taper MK 2 Tenon length: 70 mm Thread: M33 x 3,5
£87.50 *
HOPE stainless steel tool post box set. (1" post) Made from hard 316 stainless steel which is 48 Rockwell C that will never go rusty! Top rests are made from 22MM round section which allows smooth transition across the rest without...
£86.00 *
HOPE stainless steel tool post box set. (25mm post) Made from hard 316 stainless steel which is 48 Rockwell C that will never go rusty! Top rests are made from 22MM round section which allows smooth transition across the rest without...
£86.00 *
Step Jaws, designed by the famous Australian woodturner and author Richard Raffan, are used for holding a range of spigot sizes with minimum jaw movement and without the necessity to change the jaws due to its many steps. These Jaws are...
£79.50 *
These spindles has been specially made in order to be able to replicate the lathe spindle thread. The spindles them selfs are made with a double start thread. So the one above will cut a 3.5 tpi pitch but looks like a finer cutting...
£79.00 *
NOVA Large Cole Jaw Set has 120"/304mm bowl diameter capacity. An accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA chuck for specific projects and applications. Please note: Due to sizing, only...
£72.00 *