Chucks

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
from to
1 From 8
No results were found for the filter!
Oneway talon complete chuck set
Oneway talon complete chuck set
More than a 10% discount on buying this kit!!! Product information "Talon Chuck Set - complete Set" Perfect starter set for everyone who starts turning. The set contains all the necessary jaws for turning small parts such as ballpoint...
£350.00 * £392.25 *
Vicmarc 150 chuck
Vicmarc 150 chuck
M33 x 3.5mm direct thread. The VM150 has two actions, one to quickly open and close the chuck as though it was a lever operated (fully opens within 3 revolutions), the other to tighten using the 'T' key as you would in a standard...
£345.00 *
Stronghold chuck with #2 jaws
Stronghold chuck with #2 jaws
This heavy-duty chuck is designed for large lathes (16" swing or greater) to provide maximum gripping power ! Complete Package Includes #2 Top Jaws Taper-Lock Adaptor (packaged separately and with an M33 x 3.5 as standard) Please ask to...
£279.00 *
Oneway talon starter chuck set
Oneway talon starter chuck set
More than 10% discount on buying this kit!!! Product information "Talon Chuck Set - Starter Set" Perfect starter set for everyone who starts turning. The set contains all the necessary jaws for turning small parts such as ballpoint pens,...
£265.00 * £298.75 *
VM120 chuck M33 x 3.5 direct thread.
VM120 chuck M33 x 3.5 direct thread.
Vicmarc VM120 chuck including standard jaws and direct M33 x 3.5 thread. The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed...
£245.00 *
VM120 chuck 1 1/4 x 8 direct thread.
VM120 chuck 1 1/4 x 8 direct thread.
Vicmarc VM120 chuck including standard jaws and direct 1 1/4 x 8 tpi thread. The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll....
£245.00 *
VM120 chuck with thread inserts
VM120 chuck with thread inserts
VM120 chuck with standard jaws. Inserts for 1 1/2 x 6 and 1" x 8 available. The VM120 T - Bar Allen Key operated chuck allows for one-handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll....
£245.00 *
Stronghold chuck body only
Stronghold chuck body only
Body Only Package Includes Taper-Lock Adaptor (packaged separately) Key 4mm Hex Key WHEN ORDERING Please specify the adaptor thread required for your spindle or the Part No. of the Adaptor required.
£235.00 *
Vicmarc 120 chuck no jaws M33 x3.5
Vicmarc 120 chuck no jaws M33 x3.5
Vicmarc VM120 chuck with no jaws and direct M33 x 3.5 thread. The VM120 T - Bar Allen Key operated chuck allows for one-handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks...
£225.00 *
Talon chuck + #2 jaws
Talon chuck + #2 jaws
Complete Package Includes #2 Top Jaws Taper-Lock Adaptor (packaged separately and with an M33 x 3.5 as standard) Please ask to change to another thread if required when ordering. Key 1½" RH Jumbo Screw 4mm Hex Key All Oneway chucks and...
£215.00 *
VM100 chuck M33x3.5 direct thread.
VM100 chuck M33x3.5 direct thread.
VM100 chuck with standard jaws. Direct thread M33 x 3.5 The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. Keyed chucks cannot be...
£179.95 *
VM100 chuck with thread inserts
VM100 chuck with thread inserts
VM100 chuck with standard jaws. Inserts for 1 1/4 x 8, 1 1/2 x 6 and 1" x 8 available. The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the...
£179.95 *
1 From 8