Chucks

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
from to
2 From 5
No results were found for the filter!
Vicmarc bowl jaws VM120 485mm
Vicmarc bowl jaws VM120 485mm
Vicmarc 485mm bowl jaw set. For bowls 485mm dia and smaller! Fits only VM120 The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount...
£125.50 *
Bowl reversing jaws 14-16" Stronghold chuck
Bowl reversing jaws 14-16" Stronghold chuck
Bowl reversing jaws for the Stronghold chuck. (known as mega jaws on the oneway site). Swing dia is 14" closed to 16" fully open.
£118.50 *
Live center full kit
Live center full kit
Oneway 2MT live centre Full kit inc small and large cone. Two good quality bearings mounted in tandem and greased for life will give an excellent play-free performance and minimum vibration when turning. ONEWAY Live Centers are designed...
£112.00 *
Vicmarc bowl jaws VM100
Vicmarc bowl jaws VM100
Vicmarc 385mm bowl jaw set. For bowls 385mm dia and smaller! The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the...
£99.95 *
Bowl reversing jaws 11-13" Talon chuck
Bowl reversing jaws 11-13" Talon chuck
Bowl reversing jaws for the Talon chuck. (known as Jumbo jaws on the oneway site). Swing dia is 11" closed to 13" fully open.
£93.50 *
Termite complete kit
Termite complete kit
Part No. 2176 - Termite Complete Kit The following items plus the Handle & Shank(shown below): #1 Bit (3/8") #2 Bit (½") 3mm Hex Key Grinding Point Grinding Block
£89.00 *
Live centre body only
Live centre body only
Oneway 2MT live centre BODY ONLY ONEWAY LIVE CENTERS Two good quality bearings mounted in tandem and greased for life will give excellent play-free performance and minimum vibration when turning. ONEWAY Live Centers are designed...
£89.00 *
12" Cole jaw set
12" Cole jaw set
NOVA Large Cole Jaw Set has 120"/304mm bowl diameter capacity. An accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA chuck for specific projects and applications. Please note: Due to sizing, only...
£72.00 *
Vicmarc Vm120 25mm pin jaws
Vicmarc Vm120 25mm pin jaws
Vicmarc Vm120, 25mm pin jaws These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very small...
£69.50 *
VM120 dovetail jaws, 128mm,148mm & 173mm
VM120 dovetail jaws, 128mm,148mm & 173mm
Vicmarc VM120 dovetail jaws. Dovetail Jaws have been designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the Jaws form a perfect circle. VM120 and VM150 chucks...
From £66.50 *
Oneway 2MT Screw chuck
Oneway 2MT Screw chuck
Oneway #2 MT screw chuck This nifty little tool is indispensable when turning small items like drawer knobs or chess pieces. The Oneway Screw Chuck was designed in response to a requirement for making small parts. It is especially well...
£65.00 *
Vm120, shark jaws
Vm120, shark jaws
Vicmarc VM120 chuck, shark jaws. Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. they hold cylinder spigots much more safely than standard jaws. They are much easier and provide a...
From £64.50 *
2 From 5
Viewed