No results were found for the filter!
High-quality collet set in a practical wooden box. Set includes the 2MT collet holder. Th is set contains 8 ER25 pcs collets with a clamping range of 5 - 13 mm. The wooden cassette offers space for 4 additional collets and the optionally...
£112.50 *
M33 x 3.5 DIRECT THREAD ONLY The PRO-TEK Companion Chuck Body offers the user all the flexibility of the SuperNOVA2 PRO-TEK chuck with being able to add the jaw set of your choice. The version is therefore ideal for owners of another...
£112.50 * £119.99 *
Oneway 2MT live centre Full kit inc small and large cone. Two good quality bearings mounted in tandem and greased for life will give an excellent play-free performance and minimum vibration when turning. ONEWAY Live Centers are designed...
£112.00 *
Enables you to drill cross-holes quickly & easily! Ideal for the construction of chairs and stools, the DrillWizard will allow you to quickly and easily drill holes of a specific depth at a specific angle. Used in conjunction with the...
£110.00 *
HOPE Star drive set. Different from other drives, this set is the only case-hardened drive set. The pin is spring-loaded and fully retractable beyond the drive points. The points themselves are longer and sharper than other makes. The...
£110.00 *
NEW
Pin jaws, designed by well know American wood turner and author Dick Sing, are used for such items as kaleidoscopes and pepper grinders, etc. The sizes indicated on the drawing are when the jaws form a perfect circle. VM120 and VM150...
£105.50 *
Vicmarc 385mm bowl jaw set. For bowls 385mm dia and smaller! The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the...
£99.95 *
NEW
These Jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example, when turning serviette rings or...
£99.50 *
Laser kit for hollowing jig This laser kit allows the user to see exactly where the cutter is in relation to the inside of the hollow form. You set the off set of the laser say 3mm away from the cutter. When the laser then falls off the...
£99.00 *
Vicmarc 285mm bowl jaw set. For bowls 285mm dia and smaller! The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the...
£99.00 *
Vicmarc VM120 chuck, shark jaws. Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. they hold cylinder spigots much more safely than standard jaws. They are much easier and provide a...
From £97.50 *
Bowl reversing jaws for the Talon chuck. (known as Jumbo jaws on the oneway site). Swing dia is 11" closed to 13" fully open.
£93.50 *