Vicmarc VM100 chucks & jaws

The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. 

The VM100's compact size makes it ideal for use on 300mm (12") capacity lathes or smaller.

VM100 
Dia. 96mm. Net Weight 2.1kg open from 40mm to 80mm

To order any Vicmarc parts not listed on my website, please email me to discuss.

The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll.  The VM100's compact... read more »
Close window

The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. 

The VM100's compact size makes it ideal for use on 300mm (12") capacity lathes or smaller.

VM100 
Dia. 96mm. Net Weight 2.1kg open from 40mm to 80mm

To order any Vicmarc parts not listed on my website, please email me to discuss.

Close filters
 
  •  
  •  
  •  
  •  
from to
1 From 3
No results were found for the filter!
VM100 chuck M33x3.5 direct thread.
VM100 chuck M33x3.5 direct thread.
VM100 chuck with standard jaws. Direct thread M33 x 3.5 The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. Keyed chucks cannot be...
£179.95 *
VM100 chuck with thread inserts
VM100 chuck with thread inserts
VM100 chuck with standard jaws. Inserts for 1 1/4 x 8, 1 1/2 x 6 and 1" x 8 available. The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the...
£179.95 *
Vm100 M33 chuck no jaws
Vm100 M33 chuck no jaws
VM100 chuck no jaws. M33 x 3.5 direct thread.
£159.50 *
Longworth style chuck
Longworth style chuck
Product information "KS LSC 300 clamping disc, self-centering" 300mm and 400mm available form Hopewoodturnig These clamping washers are used in conjunction with a conventional chuck and clamping jaw (not included). The clamping discs...
From £130.00 *
3 in 1 Screw chuck M33x3.5
3 in 1 Screw chuck M33x3.5
V00419-2 M33 x 3.5 3 in 1 Screw Face Plate This screw chuck has three alternative diameters of 50mm, 75mm and 100mm to give optimum support to any size of work. This Screw Face Plate comes complete with a woodscrew and has direct thread...
£120.00 *
Vicmarc bowl jaws VM100
Vicmarc bowl jaws VM100
Vicmarc 385mm bowl jaw set. For bowls 385mm dia and smaller! The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the...
£99.95 *
Bowl jaws 285mm
Bowl jaws 285mm
Vicmarc 285mm bowl jaw set. For bowls 285mm dia and smaller! The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the...
£99.00 *
VM100 long nose jaws
VM100 long nose jaws
Vicmarc VM100 long nose jaws. These Jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example, when...
£69.50 *
Paul Howard M33x3.5 index system inc arm
Paul Howard M33x3.5 index system inc arm
The extensive indexing system by Paul Howard with 60, 48, 36, and 14 increments offers every woodturner an extremely wide range of scope for precise drilling, milling or fluting. The indexing system fits any lathe with an M33 x 3.5...
£65.00 *
Vicmarc 100 step jaws
Vicmarc 100 step jaws
Step Jaws, designed by the famous Australian wood turner and author Richard Raffan, are used for holding a range of spigot sizes with minimum jaw movement and without the necessity to change the jaws. These Jaws are designed primarily...
£59.00 *
Vm100, shark jaws
Vm100, shark jaws
Vicmarc VM100 chuck, 48mm, 55mm, 74mm & 88mm shark jaws. Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much...
From £54.80 *
Vicmarc VM100 dovetail jaws
Vicmarc VM100 dovetail jaws
Designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a perfect circle. VM100 chucks provide approx 38mm of expansion beyond these specified sizes.
£52.50 *
1 From 3