Vicmarc VM120 chucks & jaws

The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll.

 The VM120 will hold most work up to 500mm (20") in diameter with standard jaws.

VM120 
Dia. 136mm. Net Weight 3.9kg Open from 55mm to 110mm 

To order any Vicmarc parts not listed on my website, please email me to discuss.

The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll.  The VM120 will hold... read more »
Close window

The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll.

 The VM120 will hold most work up to 500mm (20") in diameter with standard jaws.

VM120 
Dia. 136mm. Net Weight 3.9kg Open from 55mm to 110mm 

To order any Vicmarc parts not listed on my website, please email me to discuss.

Close filters
 
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
VM120 chuck M33 x 3.5 direct thread.
VM120 chuck M33 x 3.5 direct thread.
Vicmarc VM120 chuck including standard jaws and direct M33 x 3.5 thread. The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed...
£245.00 *
VM120 chuck 1 1/4 x 8 direct thread.
VM120 chuck 1 1/4 x 8 direct thread.
Vicmarc VM120 chuck including standard jaws and direct 1 1/4 x 8 tpi thread. The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll....
£245.00 *
VM120 chuck with thread inserts
VM120 chuck with thread inserts
VM120 chuck with standard jaws. Inserts for 1 1/2 x 6 and 1" x 8 available. The VM120 T - Bar Allen Key operated chuck allows for one-handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll....
£245.00 *
Vicmarc 120 chuck no jaws M33 x3.5
Vicmarc 120 chuck no jaws M33 x3.5
Vicmarc VM120 chuck with no jaws and direct M33 x 3.5 thread. The VM120 T - Bar Allen Key operated chuck allows for one-handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks...
£225.00 *
Vicmarc bowl jaws VM120 485mm
Vicmarc bowl jaws VM120 485mm
Vicmarc 485mm bowl jaw set. For bowls 485mm dia and smaller! Fits only VM120 The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount...
£135.00 *
Vicmarc 385mm bowl jaw set
Vicmarc 385mm bowl jaw set
Vicmarc 385mm bowl jaw set. For bowls 385mm diameter and smaller! Fits only VM120 The Vicmarc Bowl Jaws adjust to allow you to re-chuck different-sized bowls to finish the bottom or do light clean-up work on the foot of the bowl. To...
£130.00 *
3 in 1 Screw chuck M33x3.5
3 in 1 Screw chuck M33x3.5
V00419-2 M33 x 3.5 3 in 1 Screw Face Plate This screw chuck has three alternative diameters of 50mm, 75mm and 100mm to give optimum support to any size of work. This Screw Face Plate comes complete with a woodscrew and has direct thread...
£120.00 *
Vm120, shark jaws
Vm120, shark jaws
Vicmarc VM120 chuck, shark jaws. Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. they hold cylinder spigots much more safely than standard jaws. They are much easier and provide a...
From £97.50 *
120 Step jaws
120 Step jaws
Step Jaws, designed by the famous Australian woodturner and author Richard Raffan, are used for holding a range of spigot sizes with minimum jaw movement and without the necessity to change the jaws due to its many steps. These Jaws are...
£79.50 *
Vicmarc Vm120 25mm pin jaws
Vicmarc Vm120 25mm pin jaws
Vicmarc Vm120, 25mm pin jaws These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very small...
£69.50 *
Paul Howard M33x3.5 index system inc arm
Paul Howard M33x3.5 index system inc arm
The extensive indexing system by Paul Howard with 60, 48, 36, and 14 increments offers every woodturner an extremely wide range of scope for precise drilling, milling or fluting. The indexing system fits any lathe with an M33 x 3.5...
£65.00 *
VM120 dovetail jaws, 105,128,148,174
VM120 dovetail jaws, 105,128,148,174
Vicmarc VM120 dovetail jaws. Dovetail Jaws have been designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the Jaws form a perfect circle. VM120 and VM150 chucks...
From £62.50 *
1 From 2