Screw chucks/pins

Close filters
 
  •  
  •  
  •  
from to
No results were found for the filter!
3 in 1 Screw chuck M33x3.5
3 in 1 Screw chuck M33x3.5
V00419-2 M33 x 3.5 3 in 1 Screw Face Plate This screw chuck has three alternative diameters of 50mm, 75mm and 100mm to give optimum support to any size of work. This Screw Face Plate comes complete with a woodscrew and has direct thread...
£120.00 *
Oneway 2MT Screw chuck
Oneway 2MT Screw chuck
Oneway #2 MT screw chuck This nifty little tool is indispensable when turning small items like drawer knobs or chess pieces. The Oneway Screw Chuck was designed in response to a requirement for making small parts. It is especially well...
£65.00 *
Oneway chuck spur
Oneway chuck spur
Oneway Chuck Spurs are available to mount directly into Chucks made by Oneway. Because of the direct mounting capability, it is unnecessary to remove the chuck from your lathe to do spindle work. The 1" Chuck Spur will work best for...
£34.50 *
2MT tail stock drill chuck.
2MT tail stock drill chuck.
2MT keyless drill chuck. 1-16mm
£27.50 *
Oneway 1 1/2 RH jumbo screw
Oneway 1 1/2 RH jumbo screw
1½" RH Jumbo Screw
£25.50 *
1 1/2"LH screw
1 1/2"LH screw
1 1/2 " LH screw.
£25.50 *
M33x3.5 to 1" 1/2 x 6
M33x3.5 to 1" 1/2 x 6
M33 x 3.5 female thread to 1" 1/2 x 6 TPI male. Made by Hopewoodturning. Gold Zinc plated
£22.50 *
M33 to 1 1/4 x 8
M33 to 1 1/4 x 8
M33 x 3.5 female thread to 1 1/4" x 8TPI male. Made by Hopewoodturning. Gold Zinc plated
£22.50 *
Big bite spur
Big bite spur
Oneway Chuck Spurs are available to mount directly into Chucks made by Oneway. At 3-3/4" diameter it easily drives pieces up to 24" in diameter but is safely contained inside the body diameter of even our smallest chuck. The spur has a...
£19.50 *
live centre cone only
live centre cone only
Part No. 2172 - Full Point Cone
£12.50 *