No results were found for the filter!
Vicmarc VM120 chuck including standard jaws and direct M33 x 3.5 thread. The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed...
£245.00 *
Vicmarc VM120 chuck including standard jaws and direct 1 1/4 x 8 tpi thread. The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll....
£245.00 *
VM120 chuck with standard jaws. Inserts for 1 1/2 x 6 and 1" x 8 available. The VM120 T - Bar Allen Key operated chuck allows for one-handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll....
£245.00 *
Vicmarc VM120 chuck with no jaws and direct M33 x 3.5 thread. The VM120 T - Bar Allen Key operated chuck allows for one-handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed chucks...
£225.00 *
Vicmarc 485mm bowl jaw set. For bowls 485mm dia and smaller! Fits only VM120 The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount...
£135.00 *
Vicmarc 385mm bowl jaw set. For bowls 385mm diameter and smaller! Fits only VM120 The Vicmarc Bowl Jaws adjust to allow you to re-chuck different-sized bowls to finish the bottom or do light clean-up work on the foot of the bowl. To...
£130.00 *
V00419-2 M33 x 3.5 3 in 1 Screw Face Plate This screw chuck has three alternative diameters of 50mm, 75mm and 100mm to give optimum support to any size of work. This Screw Face Plate comes complete with a woodscrew and has direct thread...
£120.00 *
NEW
Pin jaws, designed by well know American wood turner and author Dick Sing, are used for such items as kaleidoscopes and pepper grinders, etc. The sizes indicated on the drawing are when the jaws form a perfect circle. VM120 and VM150...
£105.50 *
NEW
These Jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example, when turning serviette rings or...
£99.50 *
Vicmarc VM120 chuck, shark jaws. Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. they hold cylinder spigots much more safely than standard jaws. They are much easier and provide a...
From £97.50 *
NEW
Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. they hold cylinder spigots much more safely than standard jaws. They are much easier and provide vastly better grip than traditional...
£87.50 *
Step Jaws, designed by the famous Australian woodturner and author Richard Raffan, are used for holding a range of spigot sizes with minimum jaw movement and without the necessity to change the jaws due to its many steps. These Jaws are...
£79.50 *