No results were found for the filter!
VM100 chuck with standard jaws. Direct thread M33 x 3.5 The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. Keyed chucks cannot be...
£179.95 *
VM100 chuck with standard jaws. Inserts for 1 1/4 x 8, 1 1/2 x 6 and 1" x 8 available. The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the...
£179.95 *
Product information "KS LSC 300 clamping disc, self-centering" 300mm and 400mm available form Hopewoodturnig These clamping washers are used in conjunction with a conventional chuck and clamping jaw (not included). The clamping discs...
From £130.00 *
V00419-2 M33 x 3.5 3 in 1 Screw Face Plate This screw chuck has three alternative diameters of 50mm, 75mm and 100mm to give optimum support to any size of work. This Screw Face Plate comes complete with a woodscrew and has direct thread...
£120.00 *
Vicmarc 385mm bowl jaw set. For bowls 385mm dia and smaller! The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the...
£99.95 *
Vicmarc 285mm bowl jaw set. For bowls 285mm dia and smaller! The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom or do light clean-up work on the foot of the bowl. To mount the bowl, the...
£99.00 *
Dovetail Jaws have been designed to mount bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a perfect circle. VM90 and VM100 chucks provide approx. 38mm of expansion...
£75.50 *
Vicmarc VM100 long nose jaws. These Jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example, when...
£68.50 *
The extensive indexing system by Paul Howard with 60, 48, 36, and 14 increments offers every woodturner an extremely wide range of scope for precise drilling, milling or fluting. The indexing system fits any lathe with an M33 x 3.5...
£65.00 *
Step Jaws, designed by the famous Australian wood turner and author Richard Raffan, are used for holding a range of spigot sizes with minimum jaw movement and without the necessity to change the jaws. These Jaws are designed primarily...
£59.00 *
Vicmarc VM100 chuck, 48mm, 55mm, 74mm & 88mm shark jaws. Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much...
From £57.90 *