Hope Hollowing Tools

NOW COMES WITH A NEW DELUXE GRUB SCREW HANDLE 6mm hook and straight mini carbide set. Excellent carbide tools for boxes and small hollow forms. Bars are made from stainless steel for strength. Hook is forged to shape with the cutter...

Designed for an all round tool from boxes to deeper vessels. The end sleeve pulls off allowing the 16mm bar to fit into any HOPE quick release handles for deep vessels yet by itself perfect for controlled small work also. The 6mm cutting...

Made from 19mm(3/4") bar and is approx 510mm long (20") An excellent and strong tool for stock removal. Suited for hollow forms with a 30mm opening or larger. Tip holder is a tear shape and is adjustable. Tip is a 6mm carbide cutter....

12MM hook tool. 30% bigger size to the 10mm hook and designed for undercutting and hollow forms about 300-350mm deep with a medium handle fitted. Designed to get into hollow forms for under cutting and cleaning up. The HSS 12mm tip is...

This 8mm heavy duty is similar in design to the 8mm straight but has a wider bar for extra stength and support and designed for bigger end grain work upto approx 280mm or 11" deep with a handle fitted. The cutter is machined and set at...

10MM hook tool. 30% smaller size to the 12mm hook and designed for undercutting and hollow forms about 200mm deep with a small handle fitted. Designed to get into hollow forms for under cutting and cleaning up. The HSS 10mm tip is made...

Large set, 400mm long with a 10mm cutter . Fits quick release handle with 9.8mm collet and any grub screw with a 10mm hole. For large boxes and medium to large open end grain work. Also works on side grain. Hope square bar, carbide...

This is 400mm long and is complete with softex handle. Excellent tool for boxes and small end-grain work. Hooked tool available if needed is my 12MMHK.

6mm carbide on a 10mm stainless steel hook bar. Excellent tool for small boxes and hollow forms. Total length is 215mm or 8 1/2". Fits into small grub or small quick release head. Tool comes with 6mm carbide tip fitted and torx key.

12mm HSS tear drop holder for the 19mm heavy duty hollowing tool. Excellent optional extra for cleaning up the inside of hollow forms etc.

6mm carbide on a 10mm stainless steel straight bar. Excellent tool for small boxes. Total length is 235mm or 9 1/4". Fits into small grub or small quick release head. Tool comes with 6mm carbide fitted and torx key.

Optional hook tip for further reach when under cutting Fits into the 6mm pro on the Hope carbide cutting tools page and 16mm carbide tip holder on the hollowing jig page.