Sharpening Jigs

Close filters
 
  •  
  •  
  •  
  •  
  •  
from to
No results were found for the filter!
8" slow grinder with CBN wheel fitted.
8" slow grinder with CBN wheel fitted.
4 in stock at Colchester "KS bench grinder DML-200N CBN - slow running 200 x 40 mm" CBN disc with aluminum flange and pre- mounted. Very good quality , and smooth running due to the robust construction. The low speed prevents the steel...
£345.00 *
Both Vicmarc sharpening jigs
Both Vicmarc sharpening jigs
The Sharpening Jig and Grinding Rest have been designed with increased stability and ease of use in mind. The Grinding Rest also comes with additional gauges to allow accurate angles to be ground. As both Slide Bases are identical,...
£274.00 * £299.00 *
Vicmarc profile sharpening jig.
Vicmarc profile sharpening jig.
The Vicmarc Sharpening Jig and Grinding Rest have been designed to make sharpening your tools quickly and easily. These products allow you to get an excellent and consistent grind every time. The Sharpening Jig and Grinding Rest can be...
£149.50 *
Vicmarc grinding adjustable rest.
Vicmarc grinding adjustable rest.
The Sharpening Jig and Grinding Rest have been designed with increased stability and ease of use in mind. The Grinding Rest also comes with additional gauges to allow accurate angles to be ground. As both Slide Bases are identical,...
£149.50 *
Wolverine Grinding Jig
Wolverine Grinding Jig
Complete Kit includes 2 bases, V-arm and Platform. (V-Arm measures 27 1/2" long and Platform measures 3" x 5" x 1/4" thick) Grinding Tip: If you are working with a tool that will need to be resharpened several times, leave the V-Arm...
£85.00 *
Wolverine finger nail profiler (standard gouges)
Wolverine finger nail profiler (standard gouges)
Vari-Grind for ½" to 1-1/8" dia. Tools (suits most popular tools turners use) This Jig is designed to be used with the Wolverine Grinding Jig.
£64.50 *
Wolverine finger nail profiler (small gouges)
Wolverine finger nail profiler (small gouges)
Vari-Grind for 1/8" to 5/8" dia. Tools (For smaller gouges) This Jig is designed to be used with the Wolverine Grinding Jig.
£64.50 *
Wolverine skew jig
Wolverine skew jig
Skew Grinding The Skew Jig was designed specifically for grinding Skews. It is quick and easy to use, and will give you an amazingly flat bevel. BACKGROUND One reason that the skew leaves such an incredible finish on work pieces is due...
£28.25 *
CC diamond file
CC diamond file
Credit card sized Diamond file 600 grit one side and 300 on the other. 50mm x 85mm and comes in a plastic wallet. Excellent for carbide tipped tools inc negative rake scrapers.
£25.00 * £26.00 *
Ray Key Collaborations Book
Ray Key Collaborations Book
Ray Key Collaborations Book. The book catalogues the collaboration project of part turned pieces from the late Ray Key’s workshop which were sent to turners around the world to finish in their own style. There are 128 pages with photos...
£25.00 *
diamond taper file
diamond taper file
3″ Diamond Taper File 400 grit (35 Micron) tapered and double sided file. It has a flat on one side with curved edges and back so an excellent all round file! Length is 180mm and the thickness tapers from 2.5mm to 1.5mm. Excellent for...
£22.00 * £24.50 *
Gauge Master Center Finder
Gauge Master Center Finder
Gauge Master Center Finder The Vicmarc - DNS Gauge Master was specially designed for woodturners to save time and money. This device incorporates angle checking and centre finding. This product is manufactured in Australia from injection...
£16.50 *
Viewed