Specialized tools and Callipers

Close filters
 
  •  
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
drill wizard
drill wizard
Enables you to drill cross-holes quickly & easily! Ideal for the construction of chairs and stools, the DrillWizard will allow you to quickly and easily drill holes of a specific depth at a specific angle. Used in conjunction with the...
£110.00 *
Termite complete kit
Termite complete kit
Part No. 2176 - Termite Complete Kit The following items plus the Handle & Shank(shown below): #1 Bit (3/8") #2 Bit (½") 3mm Hex Key Grinding Point Grinding Block
£89.00 *
MULTI-GAUGE
MULTI-GAUGE
MULTI-GAUGE The Oneway Multi-Gauge is an evolution in the way indicators can be used in the home workshop. What can the Multi-Gauge be used for? Set roller heights on your planer Square the fences on your machines Check the knife setting...
£85.00 *
Hope Detail Tool with Handle
Hope Detail Tool with Handle
HOPE detail tool inc small quick release handle with 16.2mm head. Perfect for box making and adding detailing to any work!
£65.00 *
Hope hollow form reversing tool
Hope hollow form reversing tool
Designed to safely reverse your hollow forms. The end is 2MT and simply fits direct into the headstock. Then reverse your hollow form by placing it over the hollow-form reversing tool. Bring up your tail-stock and apply enough pressure...
£39.50 *
HOPE measuring calipers
HOPE measuring calipers
Never go through the bottom of a bowl again! Now made from 304 stainless steel. 2 sizes available: 10" long so will cover up to an 18" Dia bowl 16" long so will cover up to a 30" Dia bowl CNC routered Numbers that won't wear out!
From £34.50 *
Hope detail tool
Hope detail tool
This double-ended detail tool is a very versatile tool for box making and any small detail work that needs an edge tidying up! The 8mm HSS round bar is sharpened like a parting tool and ideal for cutting parallel shoulders ideal for box...
£30.00 *
2mt to thread adaptor
2mt to thread adaptor
2 MT to fixed thread. Designed to go into the tailstock and hold the chuck with a bowl for reverse chucking on vacuum chuck or plate drive.
£29.50 *
Gauge Master Center Finder
Gauge Master Center Finder
Gauge Master Center Finder The Vicmarc - DNS Gauge Master was specially designed for woodturners to save time and money. This device incorporates angle checking and center finding. This product is manufactured in Australia from injection...
£18.50 *
Hope HSS 23 mm Replacment Cutter
Hope HSS 23 mm Replacment Cutter
Spare HSS cutter. 23mm for 19mm swan and medium shear scraper. 35mm for large shear scraper.
From £12.50 *
Hope Cryo medium shear scraper
Hope Cryo medium shear scraper
Heavy duty square shaft shear scrapers. Using this system makes shear scraping safer than ordinary scraping with a massive difference to the finish achievable! Use a diamond file to create a burr on the cutting edge for out standing...
From £12.50 *
Tool resin blank
Tool resin blank
16mm steel tube drilled out 14.5mm x 60mm deep. Used to resin in tang tools so they can be used in my handle system. (16mm grub or quick release) It is what I use to make my tang tools like the 3/4 and 1 1/4 roughing gouges.
£8.50 *
1 From 2