No results were found for the filter!
Vicmarc Vm120, 25mm pin jaws These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very small...
£69.50 *
The extensive indexing system by Paul Howard with 60, 48, 36, and 14 increments offers every woodturner an extremely wide range of scope for precise drilling, milling or fluting. The indexing system fits any lathe with an M33 x 3.5...
£65.00 *
Vicmarc VM120 dovetail jaws. Dovetail Jaws have been designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the Jaws form a perfect circle. VM120 and VM150 chucks...
From £62.50 *
These can be used instead of the traditional faceplate. They allow the remounting of prepared blanks by mounting them directly onto the chuck jaws. Also can be used for turning green wood which will require re-turning later on. Fit...
£42.00 *
The safety ring prevents clamped workpieces from detaching from the spindle and falling off during operation, for example when turning in reverse or due to unexpected heavy braking. The ring fits all lathes with M33 spindle thread and...
£38.50 *
Replacement buttons and screws for the bowls jaws that fit the VM120 chucks V00003
£38.00 *
M33 x 3.5 female thread to 1" 1/2 x 6 TPI male. Made by Hopewoodturning. Gold Zinc plated
£22.50 *
M33 x 3.5 female thread to 1 1/4" x 8TPI male. Made by Hopewoodturning. Gold Zinc plated
£22.50 *
M33 x 3.5 female thread to |M33 x 3.5 male. Extends the spindle by 40mm. Made by Hopewoodturning.
£22.50 *
Vicmarc faceplate rings. V00400 is the ring for VM100 standard chuck jaws. V00401 is the ring for VM120 and VM150 standard jaws These can be used instead of the traditional faceplate. They allow remounting of prepared blanks by mounting...
From £19.50 *