Vicmarc VM100 chucks & jaws

DUE IN 22nd SEPT

The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. 

The VM100's compact size makes it ideal for use on 300mm (12") capacity lathes or smaller.

VM100 
Dia. 96mm. Net Weight 2.1kg open from 40mm to 80mm

To order any Vicmarc parts not listed on my website, please email me to discuss.

DUE IN 22nd SEPT The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the... read more »
Close window

DUE IN 22nd SEPT

The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. 

The VM100's compact size makes it ideal for use on 300mm (12") capacity lathes or smaller.

VM100 
Dia. 96mm. Net Weight 2.1kg open from 40mm to 80mm

To order any Vicmarc parts not listed on my website, please email me to discuss.

Close filters
 
  •  
  •  
from to
No results were found for the filter!
VM100 chuck M33x3.5 direct thread.
VM100 chuck M33x3.5 direct thread.
VM100 chuck with standard jaws. Direct thread M33 x 3.5 The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the scroll. Keyed chucks cannot be...
£179.95 *
VM100 chuck with thread inserts
VM100 chuck with thread inserts
VM100 chuck with standard jaws. Inserts for 1 1/4 x 8, 1 1/2 x 6 and 1" x 8 available. The VM100 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 4.5 to 1 ratio of the...
£179.95 *
Vicmarc bowl jaws VM100
Vicmarc bowl jaws VM100
Vicmarc 385mm bowl jaw set. For bowls 385mm dia and smaller! The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To mount the bowl, the...
£99.95 *
Vm100, shark jaws
Vm100, shark jaws
Vicmarc VM100 chuck, shark jaws. Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much easier and provide...
From £55.95 *
Vicmarc VM100 dovetail jaws
Vicmarc VM100 dovetail jaws
Designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a perfect circle. VM100 chucks provide approx 38mm of expansion beyond these specified sizes.
£52.50 *
Vicmarc Vm100 25mm pin jaws
Vicmarc Vm100 25mm pin jaws
Vicmarc Vm100, 25mm pin jaws These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. They are ideal for turning salt and pepper shakers. To turn very small...
£49.50 *
NEW
Ray Key Collaborations Book
Ray Key Collaborations Book
Ray Key Collaborations Book. The book catalogues the collaboration project of part turned pieces from the late Ray Key’s workshop which were sent to turners around the world to finish in their own style. There are 128 pages with photos...
£25.00 *
Viewed