No results were found for the filter!
MIDI PRO 230mm BED EXTENSION 230mm long bed extension for the Midi pro. Fixes onto the side or end on the bed. Plate system also available to quick change form end to side position!
MIDI PRO PLATE SYSTEM FOR 230mm BED EXTENSION Comes with 3 plates so you can easily swap from the end of the bed position to the bed side position with out undoing, re-doing bolts up!
This bed extension leg and post is designed for the short bed extension when bolted to the side leg of the lathe. Adds extra support for heavier cuts with less vibration.
With this system, you can mount and de-mount your banjo really fast.
With this system, you can mount and de-mount your banjo really fast.
To make a nice curve on a bowl, the curve needs to be cut in one smooth pass. On medium, to large-sized bowls, you need a curved tool rest to do this. The ONEWAY curved tool rest is gently curved to help the bowl turning from the first...
Vicmarc 150mm wide x 30mm stem tool rest. New ergonomic toolrest style Toolrest- Round 4140 high tensie steel bar welded on top for ease of use. (available for, VL240 & VL300 lathe models)
250mm rest for the Stratos 230. Made from the same cast rest as supplied with the Stratos but reduced down to 250mm long.
Two good quality bearings mounted in tandem and greased for life will give an excellent play-free performance and minimum vibration when turning. ONEWAY Live Centers are designed specifically for the woodturner. They have a threaded,...
Ray Key Collaborations Book. The book catalogues the collaboration project of part turned pieces from the late Ray Key’s workshop which were sent to turners around the world to finish in their own style. There are 128 pages with photos...
30mm to 1" reducing sleeve for 30mm banjos. Converts your 30mm banjo to take 1" tool posts.
Viewed