No results were found for the filter!
HOPE deep vase negative rake scraper. Specially designed for finishing the inside of the average open vase or vessel. Very easy to use, and gives a great finish especially on the end grain. Tips are made from M42 steel. Smooths cleans...
From £8.50 *
16mm steel tube drilled out 14.5mm x 60mm deep. Used to resin in tang tools so they can be used in my handle system. (16mm grub or quick release) It is what I use to make my tang tools like the 3/4 and 1 1/4 roughing gouges.
£8.50 *
30mm and 26mm (suits bout 25mm and 1") collars for your tool rest and carving jig! Allows the post to be set at set heights in the banjo!
From £8.50 *
Specially made screw for holding HOPE negative rake tips into negative rake scrpaer holders.
£8.00 *
HSS 8mm round detail tool replacement. These are approx 2" long and a new one lasts me about 2 years!
£6.00 *
HSS 6mm square detail tool replacement. These are approx 2" long and a new one lasts me about 2 years!
£6.00 *
· The Termite - End Grain Deep Hollowing Tool · Unprecedented ease in hollowing, finishing, and thin wall turning make this tool a must in every turner's arsenal. · · INTRODUCTION · It will allow you to do end grain hollowing faster,...
From £6.00 *
Hook material for making sanding blocks etc. Self adhesive. Not suitable for replacing on sanding arbors
£5.00 *
Replacement sharpening mandrel for the 10 and 12mm HSS cutters that fit the 10 and 12mm hook.
£3.50 *
