Vicmarc VM120 chucks & jaws

DUE IN 22nd SEPT

The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll.

 The VM120 will hold most work up to 500mm (20") in diameter with standard jaws.

VM120 
Dia. 136mm. Net Weight 3.9kg Open from 55mm to 110mm 

To order any Vicmarc parts not listed on my website, please email me to discuss.

DUE IN 22nd SEPT The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the... read more »
Close window

DUE IN 22nd SEPT

The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll.

 The VM120 will hold most work up to 500mm (20") in diameter with standard jaws.

VM120 
Dia. 136mm. Net Weight 3.9kg Open from 55mm to 110mm 

To order any Vicmarc parts not listed on my website, please email me to discuss.

Close filters
 
  •  
  •  
from to
No results were found for the filter!
VM120 chuck M33 x 3.5 direct thread.
VM120 chuck M33 x 3.5 direct thread.
Vicmarc VM120 chuck including standard jaws and direct M33 x 3.5 thread. The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll. Keyed...
£245.00 *
VM120 chuck 1 1/4 x 8 direct thread.
VM120 chuck 1 1/4 x 8 direct thread.
Vicmarc VM120 chuck including standard jaws and direct 1 1/4 x 8 tpi thread. The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll....
£245.00 *
VM120 chuck with thread inserts
VM120 chuck with thread inserts
VM120 chuck with standard jaws. Inserts for 1 1/2 x 6 and 1" x 8 available. The VM120 T - Bar Allen Key operated chuck allows for one handed tightening along with tremendous gripping power provided by the 5 to 1 ratio of the scroll....
£245.00 *
Vicmarc bowl jaws VM120
Vicmarc bowl jaws VM120
Vicmarc 485mm bowl jaw set. For bowls 485mm dia and smaller! Fits only VM120 The Vicmarc Bowl Jaws adjust to allow you to re-chuck different sized bowls for finishing the bottom, or do light clean-up work on the foot of the bowl. To...
£125.00 *
Vicmarc Vm120 25mm pin jaws
Vicmarc Vm120 25mm pin jaws
Vicmarc Vm120, 25mm pin jaws These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very small...
£69.50 *
Vicmarc VM120 dovetail jaws
Vicmarc VM120 dovetail jaws
Vicmarc VM120 dovetail 128mm jaws. Dovetail Jaws have been designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the Jaws form a perfect circle. VM120 and VM150...
£62.50 *
Vm120, shark jaws
Vm120, shark jaws
Vicmarc VM120 chuck, shark jaws. Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. they hold cylinder spigots much more safely than standard jaws. They are much easier and provide...
From £59.95 *
NEW
Ray Key Collaborations Book
Ray Key Collaborations Book
Ray Key Collaborations Book. The book catalogues the collaboration project of part turned pieces from the late Ray Key’s workshop which were sent to turners around the world to finish in their own style. There are 128 pages with photos...
£25.00 *
Viewed