Products from Vicmarc
No results were found for the filter!
NEW
Dovetail Jaws have been designed to mount bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a perfect circle. VM90 and VM100 chucks provide approx. 38mm of expansion...
£75.50 *
Vicmarc Vm120, 25mm pin jaws These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. they are ideal for turning salt and pepper shakers. To turn very small...
£69.50 *
Vicmarc VM100 long nose jaws. These Jaws allow better access between the chuck body and the rear of the workpiece. They are also very practical when pre-turned workpieces or long workpieces have to be refastened. For example, when...
£68.50 *
NEW
Goblet Toolrest 30mm post. As the name suggests, these Toolrests are perfect for turning goblets or other similar pieces where deep access and support is required.
£67.00 *
Vicmarc VM120 dovetail jaws. Dovetail Jaws have been designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the Jaws form a perfect circle. VM120 and VM150 chucks...
From £62.50 *
Step Jaws, designed by the famous Australian wood turner and author Richard Raffan, are used for holding a range of spigot sizes with minimum jaw movement and without the necessity to change the jaws. These Jaws are designed primarily...
£59.00 *
Vicmarc 150mm wide x 30mm stem tool rest. New ergonomic toolrest style Toolrest- Round 4140 high tensie steel bar welded on top for ease of use. (available for, VL240 & VL300 lathe models)
£57.50 *
Vicmarc VM100 chuck, 48mm, 55mm, 74mm & 88mm shark jaws. Shark Jaws have serrated inner and outer jaw surfaces. These extended jaws provide an aggressive hold. They hold cylinder spigots much more safely than standard jaws. They are much...
From £54.80 *
Designed for mounting bowls by expanding into a recess or clamping onto a spigot. The sizes indicated on the drawing are when the jaws form a perfect circle. VM100 chucks provide approx 38mm of expansion beyond these specified sizes.
£52.50 *
Vicmarc Vm100, 25mm pin jaws These jaws are used for expansion into small recesses and for firm holding of fine spindle work, such as earrings, chess pieces, etc. They are ideal for turning salt and pepper shakers. To turn very small...
£49.50 *
V00659 Pen Blank Jaw set comes as a set of 2 and are designed to clamp pen blank squares for drilling as shown below. These Jaws can clamp from 10mm square blanks up to 48mm square blanks.
£42.50 *