Professional Matt Sanding Sealer

SORRY BUT UK MAINLAND DELIVERY ONLY.

Our Professional Matt Sanding Sealer Spray can be used on various surfaces, not just wood. It has been formulated to produce a tough surface for our finishes to adhere to.

Non-darkening, the spray is ideal for use over applied colours like the Intrinsic Colour Collection. Without having to wipe or brush on the sealer, you can be sure there will be no further bleeding or blending of the colours.

~ Basic Application

1. Sand your work down smooth to at least 400 grit and ensure the surface is free from dust, grease and moisture. Clean the grain of dust if using (for example, ash);

2. Shake can with the cap on for at least two minutes before use;

3. Use appropriate PPE and apply it in a well-ventilated area. Protect lathe and surfaces;

4. Using steady passes holding the can 200mm from the surface, apply an even coat;

5. Once dry, we recommend lightly cutting back the surface for a smoother surface before applying subsequent coats;

6. Apply a second coat of sealer and repeat above steps until surface is evenly coated;

7. Before applying your final finish, lightly cut back the sealer once more to a create a smooth surface.

~ Uses

Use for sealing decorative wood-turned items on a lathe, flat woodwork or other items requiring a tough sealer before finishing.

~ Colour and Aroma

Clear spray. Characteristic aroma of solvents and aerosols

~ Container

Supplied in a 400ml aerosol tin.

~ Storage

Store in a cool, dry place, ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and freezing. Keep out of direct sunlight.

~ Longevity – Use By

Kept according to instructions, you can expect the product to last indefinitely. We recommend using the product within 12 months of purchase, though.

~ Food Contact and Toy Safe?

Unknown – product has not been tested.