König Sanding Pastes

SORRY BUT UK MAINLAND DELIVERY ONLY.

Handmade high-quality paste from natural oils, orange oil, natural waxes and mineral abrasives, for wood and resin processing.

Ingredients Sanding Pastes

• Natural oils
• Orange oil
• Beeswax
• Stone powder / mineral abrasives for wood and resin processing.

The perfect basis for your finish.

Course takes the finish from 400g to 1000g approx

Fine takes teh grit from 1000g to 10000g approx!

Instructions Sanding Paste Wood&Resin coarse Work on the lathe:

Sand to 400 grit, optional quick sanding primer.

Apply paste with a soft cloth (fast tearing, for example kitchen cloth) without running machine motor.

Then spread the paste at a speed of 800 to 1000 rpm until no residue is visible on the cloth.

Work on larger objects:

For larger surfaces, please take a small amount of grinding paste on a medium hard polishing sponge, Start at approx. 800-1000 rpm.  Sand until there is no more residue.

If the desired result is not yet achieved, repeat this process.

Now the surface is ready for your usual finish.  

Instructions Sanding Paste Wood&Resin fine

After using the sanding paste Wood&Resin coarse or after

pre-sanding to grain 1000.

Work on the lathe:

Apply paste with a soft cloth (fast tearing, for example kitchen cloth) without running machine motor.

Then spread the paste at a speed of 800 to 1000 rpm until no more residue can be seen on the cloth.

Work on larger objects:

For larger surfaces, please take a small amount of grinding paste on a medium hard polishing sponge, Start at approx. 800 to 1000 rpm. Sand until there is no more residue.

If the desired result is not yet achieved, repeat this process.

Now the surface is ready for your usual finish.

Specifications are for guidance only.